The fully automatic screw oil press machine can process a variety of oils, such as cottonseed, rapeseed, palm kernel, peanuts, sesame, sunflower seeds, mustard seed, flaxseed, soybeans, castor and more than 20 kinds of oils. Fully automatic screw oil press machine are mainly used in small large oil processing plant. Our clients can obtain funding by doing in-house processing. The automatic screw oil press machine is easy to operate and can be used even by inexperienced operators.

There are some precautions during operation of the fully automatic screw oil press machine to ensure that the equipment does not malfunction.

1. The oil should be pre-treated to the appropriate humidity and temperature before entering the automatic oil press. Different oils should be treated differently.

2. After the preparation work before pressing is completed, tighten the screw shaft to the maximum, and then return it 3-4 turns to ensure that there is a certain gap at the cake mouth. Otherwise, the green body will burst due to lack of cake after feeding.

3. When the oil press first starts running, the oil press is not preheated, and the output and oil yield of the oil press cannot reach the normal values of the machine. After the machine has been running for a period of time, the temperature inside the machine reaches 100 degrees. (The operator will feel hot when touching the outside of the machine), the output and oil yield of the oil press can reach normal levels. Pressing temperature can be adjusted according to the type of oil.

4. If the oil press is shut down for a long time, usually more than one hour, the operator should clean the remaining cake in the machine before pressing the oil.

5. The operator needs to put the oil cake into the oil press and ensure that there is no raw material in the oil press before closing the oil press.

The above precautions need to be mastered by the operator to avoid problems during use and affect the oil yield and service life of the automatic oil press.